Boiler Installation Etobicoke: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across The Kingsway and Mimico
Boiler installation in Etobicoke splits by neighbourhood. The Kingsway keeps heritage radiator distribution and takes a condensing retrofit, while Mimico and Long Branch run newer combi systems that swap like for like. Both are quoted from published CAD bands.
- M-series (Etobicoke)
- Same-day GTA dispatch, 4-hour cold-snap response
- TSSA G1/G2 Licensed Crew
- The Kingsway
- Mimico
- Long Branch
- 5-Star Customer Satisfaction
- Same-Day GTA Emergency Dispatch
- 22 Years of Boiler Installation Experience
- Written Workmanship Warranty
What Actually Stops GTA Homeowners From Replacing an Aging Boiler
Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.
1. “The quote is huge, I am being oversold”
A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.
2. “You cannot tell if the technician is really licensed”
Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.
3. “Nobody publishes the price”
Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.
4. “The boiler is 25 years old, repair or replace?”
Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.
What Boilers in Etobicoke Actually Look Like
Mix of older and newer housing stock spanning cast iron retrofits and combi swaps.
Typical failure pattern: Cast iron retrofit in older enclaves or combi swap in newer areas depending on the neighbourhood.
Postal codes served: M-series (Etobicoke). Covering The Kingsway, Mimico, Long Branch and the surrounding neighbourhoods, under City of Toronto (Etobicoke).
Etobicoke retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps.
- Same-day GTA dispatch, 4-hour cold-snap response
- 22 years serving Etobicoke and Toronto
- TSSA G1/G2 technicians covering The Kingsway, Mimico and Long Branch
- 4-hour cold-snap response
Our Boiler Services in Etobicoke
Boiler installation in Etobicoke splits by neighbourhood. The Kingsway keeps heritage radiator distribution and takes a condensing retrofit, while Mimico and Long Branch run newer combi systems that swap like for like. Both are quoted from published CAD bands.
Most Requested High-Efficiency Condensing Boiler Installation Toronto
95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, PVC side-wall venting, and full Enbridge plus Canada Greener Homes rebate coordination across Toronto and the GTA.
Space Saver Combi Boiler Installation Toronto
Compact wall-mounted combi boilers delivering uninterrupted heating and on-demand domestic hot water, sized by GPM for Toronto homes and fitted with descaling valves for GTA hard water.
Boiler Replacement Toronto
End-of-life gas boiler replacement for 15 to 40 year old systems, including cast iron conversions, chimney liner de-commissioning, gas line sizing, and disposal across Toronto and the GTA.
Commercial Boiler Installation Toronto
Rooftop and basement commercial boiler installation for retail plazas, restaurants, offices, and mid-rise condos, built to CSA B51 pressure vessel code and ASHRAE 90.1 efficiency standards.
Hydronic Heating and Radiator Installation Toronto
Hydronic distribution design and radiator installation: cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, balanced and air-eliminated.
In-Floor Radiant Heating Toronto
Hydronic in-floor radiant heating retrofits and new-build installs with PEX loop layout, mixing valves, and return-water protection across four zones in Toronto and GTA homes.
Best Value Boiler Maintenance and Annual Service Toronto
Annual 12-point boiler tune-up with digital combustion analysis, expansion tank pre-charge, water pH and glycol testing, and pressure relief valve testing to keep warranties valid.
Boiler Repair Toronto
Standard and major boiler repair across ignition, pressure, and heat exchanger faults, with published CAD bands and a written repair-versus-replace analysis on every diagnostic.
24/7 Dispatch Emergency Boiler Repair Toronto
24/7 emergency boiler repair with same-day GTA dispatch and 4-hour cold-snap response for no-heat, red-tag, ignition-lockout, and frozen condensate failures.
Why Etobicoke Homeowners Choose Us
- 22 Years of Boiler Installation Experience across Toronto and the GTA
- Heritage radiator retrofits on The Kingsway, $8,500 to $14,500 CAD
- Combi swaps in Mimico and Long Branch, $5,500 to $9,500 CAD
- Narrow-lot vent routing measured and confirmed before quote, not on install day
- TSSA G1 and G2 licensed, B149 clearance compliance documented
- Enbridge and Canada Greener Homes rebate paperwork filed for you
How Our Etobicoke Boiler Installation Works, 6 Steps
From the first call to the rebate cheque, here is exactly what happens and in what order.
Site assessment
Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.
Manual J heat load and sizing
Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.
Written quote, three options
Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.
TSSA permit and scheduling
Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.
Installation and commissioning
Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.
Verification and rebate filing
TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.
Need a boiler quote in Etobicoke?
Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.
Reaching The Kingsway, Mimico and Long Branch
Etobicoke dispatch runs on the Gardiner Expressway, Highway 427, and Highway 401 with Bloor Street West, Lake Shore Boulevard West, and Royal York Road as the local connectors. The Kingsway sits north around Bloor and Royal York, Mimico and Long Branch south along Lake Shore. Same-day dispatch covers the Etobicoke M-series postal codes.
Lakeshore condo and low-rise buildings in Mimico and Long Branch have their own access rules. Service elevator booking, loading dock hours, and building management approval all have to be arranged before the install day, and we handle that as part of scheduling rather than turning up and finding the elevator booked.
Cold-snap response is four hours. On the older Kingsway homes a no-heat call usually involves an original distribution system, so the first step is confirming the loop is not air-locked or frozen before assuming the boiler is the fault.
Two Etobicoke Patterns: Heritage North, Newer South
The Kingsway was built through the 1920s and 1930s and looks a lot like Old Toronto in mechanical terms. Homes run cast iron column radiators on what started as gravity hot water distribution, and the boilers have been replaced once or twice. Retrofits here keep the radiators and rebuild the near-boiler piping, expansion tank, and controls around a condensing unit with return-water temperature protection.
Mimico and Long Branch are different. Post-war houses, mid-century low-rise, and newer infill dominate, and the heating equipment is more often a wall-mounted combi or a sealed condensing boiler. Those are like-for-like swaps sized by simultaneous hot water demand, in the $5,500 to $9,500 CAD range.
The overlap is venting. Lakeshore lots are narrow and side-wall vent terminations have to respect clearances to windows, gas meters, and the neighbouring property line. That is measured at the assessment, because a vent route that does not work is the most expensive thing to discover on install day.
- Kingsway cast iron retrofits with mixing valves and return-water protection
- Mimico and Long Branch combi swaps sized by simultaneous GPM
- Narrow-lot side-wall vent routing within B149 clearance rules
- Condo and low-rise mechanical room access coordinated with building management
- Gravity hot water conversion to pumped, zoned distribution
What Etobicoke Customers Say
The Kingsway heritage home kept its radiators. Condensing retrofit with mixing valves for $10,900 CAD.
Bianca L.
The Kingsway
5-Star Customer Satisfaction
Mimico combi replaced same week. Transparent CAD quote, installed for $7,000 CAD.
Derek H.
Mimico
Top-Rated Contractor
Long Branch boiler pump was seized. Replaced with an ECM circulator and rebalanced for $1,050 CAD.
Nadia S.
Long Branch
Trusted by Homeowners and Businesses
Tell Us What Your Boiler Is Doing
Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Etobicoke, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.
- Four published CAD scope bands, never gated
- Same-day GTA dispatch, 4-hour cold-snap response
- Enbridge and Canada Greener Homes paperwork filed for you
- Written workmanship warranty on labour
Thanks, we have your message.
A TSSA-licensed technician follows up within one business day.
Request a Written Installation Quote
Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.
Boiler Installation Etobicoke: Frequently Asked Questions
How fast can you reach The Kingsway or Mimico?
What does boiler installation cost in Etobicoke?
Can I keep the radiators in my Kingsway home?
My lot is narrow. Will a side-wall vent even fit?
Do you work in Mimico condos and low-rise buildings?
Do you cover Islington Village, Alderwood and New Toronto?
My heating loop has cold spots. Is the boiler failing?
Which rebates apply in Etobicoke?
Still have a question about your boiler?
Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.
Boiler Service Coverage in Etobicoke
Get DirectionsWe Also Cover These Areas Near Etobicoke
Book Boiler Installation in Etobicoke
Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.
- Written workmanship warranty
- Published CAD pricing, no quote gating
- TSSA G1/G2 licensed technicians