Boiler Installation Scarborough: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across Agincourt and Guildwood
[Toronto Boiler Installation](/) delivers boiler installation, high-efficiency condensing retrofits, cast iron replacement projects, and hydronic system rebuilds throughout Scarborough, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units on Agincourt subdivisions, Guildwood bluff-adjacent homes, Birch Cliff mid-century properties, Malvern high-rise condos, and Wexford post-war bungalows with ECM circulators, primary-secondary loops, and expansion tank pre-charge verification. Scarborough condensing installations run $6,500 to $12,000 CAD, cast iron retrofits $8,500 to $14,500 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD on qualifying 95%+ AFUE systems.
- M-series (Scarborough)
- Same-day GTA dispatch, 4-hour cold-snap response
- TSSA G1/G2 Licensed Crew
- Agincourt
- Guildwood
- Birch Cliff
- 5-Star Customer Satisfaction
- Same-Day GTA Emergency Dispatch
- 22 Years of Boiler Installation Experience
- Written Workmanship Warranty
What Actually Stops GTA Homeowners From Replacing an Aging Boiler
Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.
1. “The quote is huge, I am being oversold”
A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.
2. “You cannot tell if the technician is really licensed”
Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.
3. “Nobody publishes the price”
Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.
4. “The boiler is 25 years old, repair or replace?”
Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.
What Boilers in Scarborough Actually Look Like
Post-war housing stock where end-of-life gas boilers are common.
Typical failure pattern: End-of-life gas boiler needing replacement or a high-efficiency retrofit.
Postal codes served: M-series (Scarborough). Covering Agincourt, Guildwood, Birch Cliff and the surrounding neighbourhoods, under City of Toronto (Scarborough).
Scarborough retrofits run $8,500-$14,500 CAD for older cast iron, $5,500-$9,500 CAD for newer combi swaps.
- Same-day GTA dispatch, 4-hour cold-snap response
- 22 years serving Scarborough and Toronto
- TSSA G1/G2 technicians covering Agincourt, Guildwood and Birch Cliff
- 4-hour cold-snap response
Our Boiler Services in Scarborough
[Toronto Boiler Installation](/) delivers boiler installation, high-efficiency condensing retrofits, cast iron replacement projects, and hydronic system rebuilds throughout Scarborough, ON, backed by 22 years of TSSA G1/G2 licensed heating experience. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units on Agincourt subdivisions, Guildwood bluff-adjacent homes, Birch Cliff mid-century properties, Malvern high-rise condos, and Wexford post-war bungalows with ECM circulators, primary-secondary loops, and expansion tank pre-charge verification. Scarborough condensing installations run $6,500 to $12,000 CAD, cast iron retrofits $8,500 to $14,500 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD on qualifying 95%+ AFUE systems.
Most Requested High-Efficiency Condensing Boiler Installation Toronto
95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting, backed by 22 years of TSSA G1/G2 licensed experience on Viessmann Vitodens, Weil-McLain Evergreen, Navien NFC, and Bosch Greenstar units. Installation runs $6,500 to $12,000 CAD with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.
Space Saver Combi Boiler Installation Toronto
Wall-mounted combi boiler installation with plate heat exchangers, ECM pumps, and descaling flush valves for GTA hard water, backed by 22 years of TSSA G1/G2 licensed retrofit experience on Navien NCB-E, Viessmann Vitodens 100-W, Rinnai i090SN, and Bosch Greenstar Combi units. Combi installations run $4,500 to $8,500 CAD, sized by GPM demand for homes under 2,500 sq ft.
Boiler Replacement Toronto
End-of-life gas boiler replacement for 15 to 40 year old cast iron sectional systems, backed by 22 years of TSSA G1/G2 licensed retrofit experience installing Viessmann Vitodens, Weil-McLain WM97+, and Navien NFC condensing units. Retrofits run $8,500 to $14,500 CAD, with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.
Commercial Boiler Installation Toronto
Commercial rooftop and mechanical-room boiler installation to ASME pressure vessel code, CSA B51, and ASHRAE 90.1 standards, backed by 22 years of TSSA large-boiler certified experience on Lochinvar Crest, Viessmann Vitocrossal 300, Weil-McLain SlimFit, and Bradford White Copper Brute units with N+1 redundancy and low-NOx burners. Commercial installations run $8,500 to $18,000 CAD.
Hydronic Heating and Radiator Installation Toronto
Hydronic heating design with cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, backed by 22 years of TSSA G1/G2 licensed experience installing Runtal panels, Buderus Logatrend, tekmar controls, and Grundfos ALPHA circulators. Hydronic retrofits run $3,500 to $12,000 CAD, commissioned to CSA B214 with system balance verification.
In-Floor Radiant Heating Toronto
In-floor radiant heating with 12-inch on-center PEX loops, thermostatic mixing valves, return-water temperature protection, and tekmar 260 outdoor reset controls, backed by 22 years of TSSA G1/G2 licensed radiant experience installing Uponor AquaPEX, Rehau RAUPEX, and Watts Radiant systems. Radiant retrofits run $8,000 to $20,000 CAD, staple-up or slab-on-grade to CSA B214.
Best Value Boiler Maintenance and Annual Service Toronto
Annual 12-point boiler tune-up with digital combustion analysis, CO/CO2 ratio verification, expansion tank pre-charge testing, water pH checks, and pressure relief valve inspection, backed by 22 years of TSSA G1/G2 licensed maintenance service on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Annual maintenance runs $199 to $349 CAD, preserving manufacturer warranties.
Boiler Repair Toronto
Boiler repair for aquastats, control boards, gas valves, ignition modules, circulator pumps, and heat exchangers, backed by 22 years of TSSA G1/G2 licensed diagnostic experience on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Standard repairs run $200 to $1,200 CAD, major heat exchanger work $1,200 to $3,500 CAD with diagnostic waived on same-visit authorisation.
24/7 Dispatch Emergency Boiler Repair Toronto
24 hour emergency boiler repair with 4-hour cold-snap dispatch for no-heat calls, red-tag clearance, ignition-lockout troubleshooting, and frozen condensate line clearance, backed by 22 years of TSSA G1/G2 licensed emergency service on Viessmann, Weil-McLain, Navien, Bosch, and Buderus systems. After-hours diagnostic runs $199 to $349 CAD, same-day component repair $200 to $1,200 CAD.
Why Scarborough Homeowners Book With Us
- 22 Years of Boiler Installation Experience across Toronto and the GTA
- Corridor scheduling on Kingston Road and Sheppard Avenue East for tight arrival windows
- Combi swaps $5,500 to $9,500 CAD, cast iron retrofits $8,500 to $14,500 CAD
- Red-tag clearance and TSSA violation resolution handled end to end
- TSSA G1 and G2 licensed, certificate numbers on every invoice
- Enbridge and Canada Greener Homes rebate paperwork filed for you
How Our Scarborough Boiler Installation Works, 6 Steps
From the first call to the rebate cheque, here is exactly what happens and in what order.
Site assessment
Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.
Manual J heat load and sizing
Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.
Written quote, three options
Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.
TSSA permit and scheduling
Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.
Installation and commissioning
Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.
Verification and rebate filing
TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.
Need a boiler quote in Scarborough?
Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.
Dispatch Across Agincourt, Guildwood and Birch Cliff
Scarborough dispatch runs on Highway 401 with Kingston Road, Lawrence Avenue East, Sheppard Avenue East, and Markham Road as the local connectors. Agincourt sits north of the 401 around Sheppard and Kennedy, Guildwood south along Kingston Road, and Birch Cliff on the bluffs west of Midland. Same-day dispatch covers the Scarborough M-series postal codes.
Distance is the variable here. Scarborough is large, so we schedule by corridor rather than by appointment slot, grouping calls along Kingston Road or Sheppard Avenue East on the same run. That keeps arrival windows tight instead of giving you a full-day window.
Cold-snap response is four hours. On a no-heat call in post-war housing stock the diagnosis usually resolves quickly, because the failure modes on 25 to 40 year old gas boilers are well known and the parts for the common repairs are on the truck.
Post-War Scarborough Homes and End-of-Life Gas Boilers
Agincourt, Guildwood, and Birch Cliff were built out through the 1950s and 1960s as post-war family housing. Basements are full height, utility rooms are small, and the heating system has usually been replaced once already. The equipment installed in that second round is now at the end of its service life.
The common pattern is a mid-efficiency gas boiler running around 80 percent AFUE, venting into a masonry chimney, feeding either original radiators or hydronic baseboard added during a renovation. It still works, but it is burning roughly a third more gas than a modern condensing unit would for the same heat, and it has no rebate value.
A lot of Scarborough homeowners choose a combi at replacement because it removes the separate hot water tank and frees floor space in a small utility room. Where the house still runs radiators, the better answer is usually a condensing boiler with return-water temperature protection so the radiators stay and the efficiency gain is real rather than theoretical.
- End-of-life mid-efficiency gas boiler replacement
- Combi swaps that remove the separate hot water tank and free utility room space
- Condensing retrofits that retain original radiator distribution
- Masonry chimney de-commissioning and PVC side-wall venting
- Red-tag clearance and TSSA violation resolution
What Scarborough Customers Say
Agincourt boiler failed inspection. New high-efficiency unit installed to code for $8,700 CAD with paperwork filed.
Ravi M.
Agincourt
5-Star Customer Satisfaction
Guildwood post-war home, aging boiler swapped for a combi for $6,800 CAD, freeing up the utility room.
Chloe B.
Guildwood
Top-Rated Contractor
Birch Cliff no-heat call on a Sunday. Emergency dispatch fixed the ignition lockout for $580 CAD.
Malik J.
Birch Cliff
Trusted by Homeowners and Businesses
Tell Us What Your Boiler Is Doing
Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Scarborough, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.
- Four published CAD scope bands, never gated
- Same-day GTA dispatch, 4-hour cold-snap response
- Enbridge and Canada Greener Homes paperwork filed for you
- Written workmanship warranty on labour
Thanks, we have your message.
A TSSA-licensed technician follows up within one business day.
Request a Written Installation Quote
Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.
Boiler Installation Scarborough: Frequently Asked Questions
How fast can you reach Agincourt or Guildwood?
What does boiler installation cost in Scarborough?
My boiler was red-tagged. What now?
Should I switch to a combi to free up my utility room?
Is an 80% AFUE boiler worth keeping?
Do you cover Malvern, Woburn and West Hill?
What happens to my chimney on a high-efficiency install?
Do you offer annual maintenance?
Still have a question about your boiler?
Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.
Boiler Service Coverage in Scarborough
Get DirectionsWe Also Cover These Areas Near Scarborough
Book Boiler Installation in Scarborough
Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.
- Written workmanship warranty
- Published CAD pricing, no quote gating
- TSSA G1/G2 licensed technicians