Skip to main content
24/7 Cold Snap Emergency Response(647) 254-9788
Toronto Boiler Installation

Boiler Installation Richmond Hill: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across Oak Ridges and Bayview Hill

[Toronto Boiler Installation](/) delivers boiler installation, hydronic distribution retrofits, mixing valve system design, and combi boiler swaps throughout Richmond Hill, ON, backed by 22 years of TSSA G1/G2 licensed heating service. Our technicians install Viessmann Vitodens 100 and 200, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units across Oak Ridges Moraine properties, Mill Pond heritage homes, Bayview Hill estates, Jefferson subdivisions, and Rouge Woods new-builds with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting engineered for Yonge corridor building density. Richmond Hill condensing installations run $6,500 to $12,000 CAD, Bayview Hill estate systems $8,500 to $18,000 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD.

Richmond Hill Cost Anchor: Richmond Hill hydronic and combi systems run $5,500-$9,500 CAD for a swap. Combi boiler installation runs $4,500 to $8,500 CAD and a 95%+ AFUE condensing unit $6,500 to $12,000 CAD, with combined Enbridge and federal rebates offsetting up to $11,500 CAD.
  • L4B-L4E
  • Same-day GTA dispatch, 4-hour cold-snap response
  • TSSA G1/G2 Licensed Crew
  • Oak Ridges
  • Bayview Hill
  • Mill Pond
  • 5-Star Customer Satisfaction
  • Same-Day GTA Emergency Dispatch
  • 22 Years of Boiler Installation Experience
  • Written Workmanship Warranty
Common Objections

What Actually Stops GTA Homeowners From Replacing an Aging Boiler

Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.

1. “The quote is huge, I am being oversold”

A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.

2. “You cannot tell if the technician is really licensed”

Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.

3. “Nobody publishes the price”

Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.

4. “The boiler is 25 years old, repair or replace?”

Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.

Local Housing Stock

What Boilers in Richmond Hill Actually Look Like

Mix of newer hydronic and larger custom homes on higher heating loads.

Typical failure pattern: Aging condensing unit or radiant control fault on larger heating loads.

Postal codes served: L4B-L4E. Covering Oak Ridges, Bayview Hill, Mill Pond and the surrounding neighbourhoods, under City of Richmond Hill.

Richmond Hill hydronic and combi systems run $5,500-$9,500 CAD for a swap.

  • Same-day GTA dispatch, 4-hour cold-snap response
  • 22 years serving Richmond Hill and York Region
  • TSSA G1/G2 technicians covering Oak Ridges, Bayview Hill and Mill Pond
  • 4-hour cold-snap response
Basement mechanical room with a condensing boiler in a Richmond Hill home

Our Boiler Services in Richmond Hill

[Toronto Boiler Installation](/) delivers boiler installation, hydronic distribution retrofits, mixing valve system design, and combi boiler swaps throughout Richmond Hill, ON, backed by 22 years of TSSA G1/G2 licensed heating service. Our technicians install Viessmann Vitodens 100 and 200, Weil-McLain Evergreen, Navien NFC, Bosch Greenstar, and Rinnai i090SN units across Oak Ridges Moraine properties, Mill Pond heritage homes, Bayview Hill estates, Jefferson subdivisions, and Rouge Woods new-builds with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting engineered for Yonge corridor building density. Richmond Hill condensing installations run $6,500 to $12,000 CAD, Bayview Hill estate systems $8,500 to $18,000 CAD, and combined Enbridge and Canada Greener Homes rebates offset up to $11,500 CAD.

Wall-mounted 95%+ AFUE condensing boiler installed in a Toronto basement with copper near-boiler piping and PVC flue Most Requested

High-Efficiency Condensing Boiler Installation Toronto

95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting, backed by 22 years of TSSA G1/G2 licensed experience on Viessmann Vitodens, Weil-McLain Evergreen, Navien NFC, and Bosch Greenstar units. Installation runs $6,500 to $12,000 CAD with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$6,500 - $12,000 CAD
Wall-mounted combi boiler installed in a compact Toronto utility room with isolation valves and domestic hot water piping Space Saver

Combi Boiler Installation Toronto

Wall-mounted combi boiler installation with plate heat exchangers, ECM pumps, and descaling flush valves for GTA hard water, backed by 22 years of TSSA G1/G2 licensed retrofit experience on Navien NCB-E, Viessmann Vitodens 100-W, Rinnai i090SN, and Bosch Greenstar Combi units. Combi installations run $4,500 to $8,500 CAD, sized by GPM demand for homes under 2,500 sq ft.

$4,500 - $8,500 CAD
Toronto Boiler Installation crew breaking down an old cast iron sectional boiler beside its new condensing replacement

Boiler Replacement Toronto

End-of-life gas boiler replacement for 15 to 40 year old cast iron sectional systems, backed by 22 years of TSSA G1/G2 licensed retrofit experience installing Viessmann Vitodens, Weil-McLain WM97+, and Navien NFC condensing units. Retrofits run $8,500 to $14,500 CAD, with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$8,500 - $14,500 CAD
Cascading commercial condensing boilers in a Toronto mid-rise mechanical room with common venting header

Commercial Boiler Installation Toronto

Commercial rooftop and mechanical-room boiler installation to ASME pressure vessel code, CSA B51, and ASHRAE 90.1 standards, backed by 22 years of TSSA large-boiler certified experience on Lochinvar Crest, Viessmann Vitocrossal 300, Weil-McLain SlimFit, and Bradford White Copper Brute units with N+1 redundancy and low-NOx burners. Commercial installations run $8,500 to $18,000 CAD.

$8,500 - $18,000 CAD
Restored cast iron column radiator with a thermostatic radiator valve in a pre-war Toronto living room

Hydronic Heating and Radiator Installation Toronto

Hydronic heating design with cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, backed by 22 years of TSSA G1/G2 licensed experience installing Runtal panels, Buderus Logatrend, tekmar controls, and Grundfos ALPHA circulators. Hydronic retrofits run $3,500 to $12,000 CAD, commissioned to CSA B214 with system balance verification.

$3,500 - $12,000 CAD
Oxygen-barrier PEX radiant loops laid across a Toronto basement slab before pour, with the manifold on the wall behind

In-Floor Radiant Heating Toronto

In-floor radiant heating with 12-inch on-center PEX loops, thermostatic mixing valves, return-water temperature protection, and tekmar 260 outdoor reset controls, backed by 22 years of TSSA G1/G2 licensed radiant experience installing Uponor AquaPEX, Rehau RAUPEX, and Watts Radiant systems. Radiant retrofits run $8,000 to $20,000 CAD, staple-up or slab-on-grade to CSA B214.

$8,000 - $20,000 CAD
Toronto Boiler Installation technician using a digital flue gas analyser during an annual 12-point boiler tune-up Best Value

Boiler Maintenance and Annual Service Toronto

Annual 12-point boiler tune-up with digital combustion analysis, CO/CO2 ratio verification, expansion tank pre-charge testing, water pH checks, and pressure relief valve inspection, backed by 22 years of TSSA G1/G2 licensed maintenance service on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Annual maintenance runs $199 to $349 CAD, preserving manufacturer warranties.

$199 - $349 CAD
Toronto Boiler Installation technician testing an ignition control board inside an opened boiler casing

Boiler Repair Toronto

Boiler repair for aquastats, control boards, gas valves, ignition modules, circulator pumps, and heat exchangers, backed by 22 years of TSSA G1/G2 licensed diagnostic experience on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Standard repairs run $200 to $1,200 CAD, major heat exchanger work $1,200 to $3,500 CAD with diagnostic waived on same-visit authorisation.

$200 - $3,500 CAD
Technician diagnosing a failed boiler during an emergency no-heat call in a Toronto basement 24/7 Dispatch

Emergency Boiler Repair Toronto

24 hour emergency boiler repair with 4-hour cold-snap dispatch for no-heat calls, red-tag clearance, ignition-lockout troubleshooting, and frozen condensate line clearance, backed by 22 years of TSSA G1/G2 licensed emergency service on Viessmann, Weil-McLain, Navien, Bosch, and Buderus systems. After-hours diagnostic runs $199 to $349 CAD, same-day component repair $200 to $1,200 CAD.

$199 - $349 CAD
Why Choose Us

Why Richmond Hill Homeowners Call Us

  • 22 Years of Boiler Installation Experience across Toronto and the GTA
  • Specialists in first-generation condensing replacements on large heating loads
  • Combi and condensing swaps $5,500 to $9,500 CAD, high-efficiency $6,500 to $12,000 CAD
  • Manual J heat load on every installation so the unit is not oversized
  • TSSA G1 and G2 licensed, acid condensate neutralisation fitted as standard
  • Enbridge and Canada Greener Homes rebate paperwork filed for you
The Framework

How Our Richmond Hill Boiler Installation Works, 6 Steps

From the first call to the rebate cheque, here is exactly what happens and in what order.

  1. 1

    Site assessment

    Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.

  2. 2

    Manual J heat load and sizing

    Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.

  3. 3

    Written quote, three options

    Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.

  4. 4

    TSSA permit and scheduling

    Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.

  5. 5

    Installation and commissioning

    Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.

  6. 6

    Verification and rebate filing

    TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.

Need a boiler quote in Richmond Hill?

Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.

Dispatch to Oak Ridges, Bayview Hill and Mill Pond

Richmond Hill runs north and south along Yonge Street and Bayview Avenue with Highway 404 and Highway 407 carrying the through traffic. Oak Ridges sits at the north end past Bloomington Road, Bayview Hill to the south-east, and Mill Pond just west of Yonge near Major Mackenzie Drive. Same-day dispatch covers the L4B to L4E postal codes.

Oak Ridges is the one part of the city where winter access needs planning. Properties on the moraine sit back from the road on long driveways, and a storm day means the crew arrives with the equipment staged for a longer carry. We confirm access at the assessment rather than discovering it on install day.

Cold-snap response is four hours across the city. Where a large-load home has lost heat, the first priority is establishing safe temporary heat to the occupied zones while the diagnosis is completed, rather than leaving a house cold while parts are sourced.

Large Heating Loads and Aging First-Generation Condensing Units

Richmond Hill has a high proportion of custom and estate homes with heating loads two to three times a standard GTA house. Many of them were built during the first wave of residential condensing boiler adoption, which means the original equipment is now 15 to 20 years old and at the end of its service life even though it looks modern.

First-generation condensing units fail in a recognisable way. The stainless heat exchanger accumulates deposits because the condensate was never properly neutralised, the modulating burner loses its turn-down range and starts short-cycling, and the control board begins throwing intermittent lockouts that clear on a reset. Those are the calls we take most often in Bayview Hill and Mill Pond.

Oak Ridges adds radiant. Larger lots and finished lower levels mean slab loops with mixing stations, and the failures there are typically control faults: a drifted outdoor reset sensor, a mixing valve out of setpoint, or a circulator that has lost head on one loop. We check the control layer before quoting equipment.

  • First-generation condensing boiler replacement with proper condensate neutralisation
  • Manual J heat load sizing for large custom homes, no oversizing
  • Radiant mixing station and outdoor reset diagnosis
  • Multi-zone circulator and delta T balancing
  • Indirect domestic hot water tank integration on high-demand homes
Customer Feedback

What Richmond Hill Customers Say

Bayview Hill home, aging condensing boiler. Replaced with a right-sized 95% AFUE unit for $9,300 CAD.

Kevin D.

Bayview Hill

5-Star Customer Satisfaction

Oak Ridges combi lost hot water flow from scaling. Descaled and serviced for $340 CAD and flow returned.

Sandra P.

Oak Ridges

Top-Rated Contractor

Mill Pond boiler quit on a cold night. Same-day emergency dispatch and repair for $610 CAD.

Amir K.

Mill Pond

Trusted by Homeowners and Businesses

Get a Quote

Tell Us What Your Boiler Is Doing

Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Richmond Hill, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.

  • Four published CAD scope bands, never gated
  • Same-day GTA dispatch, 4-hour cold-snap response
  • Enbridge and Canada Greener Homes paperwork filed for you
  • Written workmanship warranty on labour

Request a Written Installation Quote

Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.

Prefer to talk now? Call (647) 254-9788 for same-day GTA dispatch.

Local Questions

Boiler Installation Richmond Hill: Frequently Asked Questions

How fast can you reach Oak Ridges or Bayview Hill?

Same-day dispatch covers the L4B to L4E postal codes and cold-snap no-heat calls get a technician within four hours. Oak Ridges properties on long moraine driveways are staged for a longer equipment carry, which is confirmed at the assessment.

What does a boiler replacement cost in Richmond Hill?

Richmond Hill hydronic and combi systems run $5,500 to $9,500 CAD for a swap and $6,500 to $12,000 CAD for a standard 95%+ AFUE condensing installation. Large custom homes with higher loads and indirect tanks scale above that. Combined rebates offset up to $11,500 CAD.

My condensing boiler is only 16 years old. Is it really at end of life?

Wall-mounted condensing boilers last 15 to 20 years, so 16 is within the replacement window. First-generation units in particular fail through heat exchanger deposits, a narrowing burner turn-down range, and intermittent control lockouts. We give you a written repair-versus-replace comparison rather than a verdict.

What is acid condensate neutralisation and do I need it?

Condensing boilers produce mildly acidic condensate. A neutraliser cartridge raises the pH before it enters the drain, protecting the piping and the heat exchanger. Missing or exhausted neutralisers are a common reason first-generation units in Richmond Hill fail early, so we fit and document it on every install.

Can you handle a home with an indirect hot water tank?

Yes. On high-demand homes an indirect tank on a priority zone is usually a better answer than a large combi, because it decouples domestic hot water from the heating load. We size the tank and the priority logic together with the boiler.

Which rebates apply in Richmond Hill?

Enbridge Home Efficiency Rebate Plus up to $6,500 CAD, Canada Greener Homes Grant up to $5,000 CAD, and Canada Greener Homes Loan up to $40,000 CAD at 0% interest. We file the paperwork as an ENERGY STAR certified installer.

Do you cover Jefferson, Rouge Woods and Crosby?

Yes. The full L4B to L4E range is covered on the same day schedule, including Jefferson, Rouge Woods, Crosby, Devonsleigh, and the Yonge Street corridor.

How often should a high-efficiency boiler be serviced?

Annually. The 12-point tune-up at $199 to $349 CAD includes digital combustion analysis, heat exchanger wash, condensate neutraliser check, expansion tank pre-charge, and a pressure relief valve test. On condensing units the neutraliser check is what most annual services miss.

Still have a question about your boiler?

Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.

Boiler Service Coverage in Richmond Hill

Get Directions
Same-Day Emergency Dispatch, 24/7 Cold Snap Response

Book Boiler Installation in Richmond Hill

Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.

  • Written workmanship warranty
  • Published CAD pricing, no quote gating
  • TSSA G1/G2 licensed technicians