Skip to main content
24/7 Cold Snap Emergency Response(647) 254-9788
Toronto Boiler Installation

Boiler Installation Mississauga: High-Efficiency, Combi, Replacement and Hydronic Heating Service Across Port Credit and Streetsville

[Toronto Boiler Installation](/) delivers combi boiler installation, high-efficiency condensing retrofits, hydronic heating rebuilds, and cast iron replacements throughout Mississauga, ON, backed by 22 years of TSSA G1/G2 licensed heating service. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NCB-E, Bosch Greenstar Combi, and Rinnai i090SN units on Port Credit lakefront properties, Streetsville heritage homes, Erin Mills subdivisions, and Cooksville retrofit projects with ECM circulators, expansion tank pre-charge testing, and PVC concentric venting sized for Peel Region water hardness. Mississauga combi installations run $4,500 to $8,500 CAD and high-efficiency condensing retrofits $6,500 to $12,000 CAD, with Enbridge and Canada Greener Homes rebates coordinated on qualifying installs.

Mississauga Cost Anchor: Newer Mississauga hydronic systems run $5,500-$9,500 CAD for a combi swap. Combi boiler installation runs $4,500 to $8,500 CAD and a 95%+ AFUE condensing unit $6,500 to $12,000 CAD, with combined Enbridge and federal rebates offsetting up to $11,500 CAD.
  • L5A-L5W
  • Same-day GTA dispatch, 4-hour cold-snap response
  • TSSA G1/G2 Licensed Crew
  • Port Credit
  • Streetsville
  • 5-Star Customer Satisfaction
  • Same-Day GTA Emergency Dispatch
  • 22 Years of Boiler Installation Experience
  • Written Workmanship Warranty
Common Objections

What Actually Stops GTA Homeowners From Replacing an Aging Boiler

Four objections come up on almost every call. Here is the straight answer to each, with the CAD numbers attached.

1. “The quote is huge, I am being oversold”

A high-efficiency condensing swap runs $6,500 to $12,000 CAD because it includes a new condensate line, PVC flue rework, near-boiler piping, expansion tank, zone controls, and the TSSA permit. Every line item appears on the quote in CAD. Combined Enbridge and federal rebates offset up to $11,500 CAD.

2. “You cannot tell if the technician is really licensed”

Ontario requires TSSA G1 or G2 certification for gas boiler work, plus CSA B51 for large-BTU pressure vessels. Certificate numbers appear on every invoice and TSSA permit numbers appear on completed work.

3. “Nobody publishes the price”

Our four CAD scope bands are published on this page: diagnostic $99 to $249, standard repair $200 to $1,200, major repair $1,200 to $3,500, and full combi installation $4,500 to $8,500. High-efficiency condensing runs $6,500 to $12,000 CAD.

4. “The boiler is 25 years old, repair or replace?”

Cast iron lasts 30 to 50 years but drops to 60 to 70 percent efficiency by year 25. A modern 95% AFUE unit cuts natural gas bills 25 to 35 percent, qualifies for up to $11,500 CAD in rebates, and pays back in 6 to 10 years. You get a written repair-versus-replace on every diagnostic.

Local Housing Stock

What Boilers in Mississauga Actually Look Like

Mixed housing stock spanning older lakefront homes and newer hydronic systems.

Typical failure pattern: End-of-life boiler across a mix of cast iron and combi systems depending on the neighbourhood.

Postal codes served: L5A-L5W. Covering Port Credit, Streetsville and the surrounding neighbourhoods, under City of Mississauga.

Newer Mississauga hydronic systems run $5,500-$9,500 CAD for a combi swap.

  • Same-day GTA dispatch, 4-hour cold-snap response
  • 22 years serving Mississauga and Peel Region
  • TSSA G1/G2 technicians covering Port Credit and Streetsville
  • 4-hour cold-snap response
Basement mechanical room with a condensing boiler in a Mississauga home

Our Boiler Services in Mississauga

[Toronto Boiler Installation](/) delivers combi boiler installation, high-efficiency condensing retrofits, hydronic heating rebuilds, and cast iron replacements throughout Mississauga, ON, backed by 22 years of TSSA G1/G2 licensed heating service. Our technicians install Viessmann Vitodens 100, Weil-McLain Evergreen, Navien NCB-E, Bosch Greenstar Combi, and Rinnai i090SN units on Port Credit lakefront properties, Streetsville heritage homes, Erin Mills subdivisions, and Cooksville retrofit projects with ECM circulators, expansion tank pre-charge testing, and PVC concentric venting sized for Peel Region water hardness. Mississauga combi installations run $4,500 to $8,500 CAD and high-efficiency condensing retrofits $6,500 to $12,000 CAD, with Enbridge and Canada Greener Homes rebates coordinated on qualifying installs.

Wall-mounted 95%+ AFUE condensing boiler installed in a Toronto basement with copper near-boiler piping and PVC flue Most Requested

High-Efficiency Condensing Boiler Installation Toronto

95%+ AFUE condensing boiler installation with 316L stainless heat exchangers, ECM circulators, and PVC concentric venting, backed by 22 years of TSSA G1/G2 licensed experience on Viessmann Vitodens, Weil-McLain Evergreen, Navien NFC, and Bosch Greenstar units. Installation runs $6,500 to $12,000 CAD with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$6,500 - $12,000 CAD
Wall-mounted combi boiler installed in a compact Toronto utility room with isolation valves and domestic hot water piping Space Saver

Combi Boiler Installation Toronto

Wall-mounted combi boiler installation with plate heat exchangers, ECM pumps, and descaling flush valves for GTA hard water, backed by 22 years of TSSA G1/G2 licensed retrofit experience on Navien NCB-E, Viessmann Vitodens 100-W, Rinnai i090SN, and Bosch Greenstar Combi units. Combi installations run $4,500 to $8,500 CAD, sized by GPM demand for homes under 2,500 sq ft.

$4,500 - $8,500 CAD
Toronto Boiler Installation crew breaking down an old cast iron sectional boiler beside its new condensing replacement

Boiler Replacement Toronto

End-of-life gas boiler replacement for 15 to 40 year old cast iron sectional systems, backed by 22 years of TSSA G1/G2 licensed retrofit experience installing Viessmann Vitodens, Weil-McLain WM97+, and Navien NFC condensing units. Retrofits run $8,500 to $14,500 CAD, with combined Enbridge Home Efficiency Rebate Plus and Canada Greener Homes Grant offsetting up to $11,500 CAD.

$8,500 - $14,500 CAD
Cascading commercial condensing boilers in a Toronto mid-rise mechanical room with common venting header

Commercial Boiler Installation Toronto

Commercial rooftop and mechanical-room boiler installation to ASME pressure vessel code, CSA B51, and ASHRAE 90.1 standards, backed by 22 years of TSSA large-boiler certified experience on Lochinvar Crest, Viessmann Vitocrossal 300, Weil-McLain SlimFit, and Bradford White Copper Brute units with N+1 redundancy and low-NOx burners. Commercial installations run $8,500 to $18,000 CAD.

$8,500 - $18,000 CAD
Restored cast iron column radiator with a thermostatic radiator valve in a pre-war Toronto living room

Hydronic Heating and Radiator Installation Toronto

Hydronic heating design with cast iron column radiators, baseboard convectors, thermostatic radiator valves, and oxygen-barrier PEX manifolds, backed by 22 years of TSSA G1/G2 licensed experience installing Runtal panels, Buderus Logatrend, tekmar controls, and Grundfos ALPHA circulators. Hydronic retrofits run $3,500 to $12,000 CAD, commissioned to CSA B214 with system balance verification.

$3,500 - $12,000 CAD
Oxygen-barrier PEX radiant loops laid across a Toronto basement slab before pour, with the manifold on the wall behind

In-Floor Radiant Heating Toronto

In-floor radiant heating with 12-inch on-center PEX loops, thermostatic mixing valves, return-water temperature protection, and tekmar 260 outdoor reset controls, backed by 22 years of TSSA G1/G2 licensed radiant experience installing Uponor AquaPEX, Rehau RAUPEX, and Watts Radiant systems. Radiant retrofits run $8,000 to $20,000 CAD, staple-up or slab-on-grade to CSA B214.

$8,000 - $20,000 CAD
Toronto Boiler Installation technician using a digital flue gas analyser during an annual 12-point boiler tune-up Best Value

Boiler Maintenance and Annual Service Toronto

Annual 12-point boiler tune-up with digital combustion analysis, CO/CO2 ratio verification, expansion tank pre-charge testing, water pH checks, and pressure relief valve inspection, backed by 22 years of TSSA G1/G2 licensed maintenance service on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Annual maintenance runs $199 to $349 CAD, preserving manufacturer warranties.

$199 - $349 CAD
Toronto Boiler Installation technician testing an ignition control board inside an opened boiler casing

Boiler Repair Toronto

Boiler repair for aquastats, control boards, gas valves, ignition modules, circulator pumps, and heat exchangers, backed by 22 years of TSSA G1/G2 licensed diagnostic experience on Viessmann, Weil-McLain, Navien, Bosch, Buderus, and IBC systems. Standard repairs run $200 to $1,200 CAD, major heat exchanger work $1,200 to $3,500 CAD with diagnostic waived on same-visit authorisation.

$200 - $3,500 CAD
Technician diagnosing a failed boiler during an emergency no-heat call in a Toronto basement 24/7 Dispatch

Emergency Boiler Repair Toronto

24 hour emergency boiler repair with 4-hour cold-snap dispatch for no-heat calls, red-tag clearance, ignition-lockout troubleshooting, and frozen condensate line clearance, backed by 22 years of TSSA G1/G2 licensed emergency service on Viessmann, Weil-McLain, Navien, Bosch, and Buderus systems. After-hours diagnostic runs $199 to $349 CAD, same-day component repair $200 to $1,200 CAD.

$199 - $349 CAD
Why Choose Us

Why Mississauga Homeowners Choose Us

  • 22 Years of Boiler Installation Experience across Toronto and the GTA
  • Both housing types covered: lakefront cast iron retrofits and newer combi swaps
  • Combi swaps $5,500 to $9,500 CAD, condensing retrofits $8,500 to $14,500 CAD
  • TSSA G1 and G2 licensed, Ontario Building Code Part 6 and Part 7 compliant
  • Same-day dispatch across the L5A to L5W postal codes
  • Enbridge and Canada Greener Homes rebate paperwork filed for you
The Framework

How Our Mississauga Boiler Installation Works, 6 Steps

From the first call to the rebate cheque, here is exactly what happens and in what order.

  1. 1

    Site assessment

    Postal code, home age, distribution type, existing AFUE, and heating load in BTU per square foot. Same-day or next-morning visit.

  2. 2

    Manual J heat load and sizing

    Written heat load with boiler capacity sized to the actual home load. No oversizing, which is what causes short cycling.

  3. 3

    Written quote, three options

    Combi, split system, and high-efficiency retrofit priced in CAD with parts, labour, permits, disposal, and rebate offset per option.

  4. 4

    TSSA permit and scheduling

    Ontario Building Code Part 6 compliance verified. Installation within 3 to 7 business days standard, 24 to 48 hours on emergencies.

  5. 5

    Installation and commissioning

    Boiler installed to CSA B51, near-boiler piping to ASHRAE 90.1, condensate neutralised, combustion analysis with a CO monitor, system purged and rebalanced.

  6. 6

    Verification and rebate filing

    TSSA inspection where required, warranty registration filed, Enbridge and Canada Greener Homes paperwork submitted, written workmanship warranty issued.

Need a boiler quote in Mississauga?

Published CAD pricing, TSSA-licensed technicians, and same-day dispatch across the whole coverage area.

Covering Port Credit, Streetsville and the L5 Postal Codes

Mississauga is wide rather than dense, so dispatch is planned around the Queen Elizabeth Way, Highway 403, and Highway 401 with Hurontario Street, Dundas Street, and Lakeshore Road West as the cross connectors. Port Credit calls come off Lakeshore, Streetsville calls come off Britannia Road and Mississauga Road. Same-day dispatch covers the full L5A to L5W range.

Because the city spans both older lakefront stock and newer subdivisions, the truck is loaded for both. That means condensing boiler parts and combi service parts on the same run, plus the fittings for cast iron near-boiler piping. It is the reason a Mississauga diagnostic usually ends with a repair completed the same visit instead of a return trip.

Cold-snap response is four hours across the city. If the unit is red-tagged and cannot be safely restarted, we leave the property with a written repair-versus-replace comparison in CAD rather than a verbal estimate.

Two Very Different Mississauga Housing Types

Port Credit and the older lakefront pockets behave like Old Toronto. Homes built before the 1960s often kept hot water distribution with cast iron or early steel radiators, and the boiler is now well past year 25. Those become condensing retrofits where the radiators stay and the near-boiler piping, expansion tank, and controls are rebuilt around a 95%+ AFUE unit. Budget $8,500 to $14,500 CAD when the distribution is original.

Streetsville, Erin Mills, Meadowvale, and the newer subdivisions behave like Vaughan. Wall-mounted combi units and sealed condensing boilers dominate, and the call is usually about lost domestic hot water flow, short cycling, or an ignition lockout on a unit in its teens. Those are like-for-like swaps in the $5,500 to $9,500 CAD range.

Condominium and townhouse mechanical closets are a third pattern. Space is tight, the vent run is fixed by the building, and any replacement has to fit the existing penetration and clearances. We measure the closet and the vent termination at the site assessment rather than on install day.

  • Cast iron and early steel radiator retrofits near the lake
  • Combi replacement sized by simultaneous GPM in newer subdivisions
  • Townhouse and condo mechanical closet swaps within fixed vent runs
  • Hydronic baseboard balancing and air elimination
  • Descaling and mixing valve service for Peel Region hard water
Customer Feedback

What Mississauga Customers Say

Port Credit home with an old cast iron boiler. The crew retrofitted a condensing unit and kept the radiators for $10,400 CAD.

Aisha B.

Port Credit

5-Star Customer Satisfaction

Streetsville combi failed on a cold night. Same-day dispatch and a new combi installed for $6,900 CAD.

Thomas L.

Streetsville

Top-Rated Contractor

Annual tune-up caught a low expansion tank pre-charge before winter. Twelve-point service for $269 CAD kept the warranty valid.

Grace M.

Mississauga

Trusted by Homeowners and Businesses

Get a Quote

Tell Us What Your Boiler Is Doing

Short form, no gatekeeping. A TSSA-licensed technician follows up with a written CAD quote for Mississauga, and the diagnostic fee comes off the invoice when you authorise the work on the same visit.

  • Four published CAD scope bands, never gated
  • Same-day GTA dispatch, 4-hour cold-snap response
  • Enbridge and Canada Greener Homes paperwork filed for you
  • Written workmanship warranty on labour

Request a Written Installation Quote

Send the details and a TSSA-licensed technician follows up with an itemised CAD quote. No email address required from us, no quote gating from you.

Prefer to talk now? Call (647) 254-9788 for same-day GTA dispatch.

Local Questions

Boiler Installation Mississauga: Frequently Asked Questions

How fast is dispatch to Port Credit or Streetsville?

Same-day dispatch covers the full L5A to L5W range and cold-snap no-heat calls get a technician within four hours. Port Credit is reached off Lakeshore Road West, Streetsville off Britannia Road and Mississauga Road.

What does boiler installation cost in Mississauga?

Newer Mississauga hydronic systems run $5,500 to $9,500 CAD for a combi swap. Older lakefront homes that keep cast iron distribution run $8,500 to $14,500 CAD for a full high-efficiency retrofit. Combined Enbridge and federal rebates offset up to $11,500 CAD.

I live in a townhouse with a mechanical closet. Can you still replace the boiler?

Yes. We measure the closet footprint and the existing vent termination at the site assessment and size the replacement to fit the fixed vent run and clearances. That check happens before the quote so install day has no surprises.

Can a condensing boiler work with my old radiators?

Yes. Cast iron and early steel radiator distribution pairs with a 95%+ AFUE condensing boiler when you add a mixing valve, an outdoor reset curve, and return-water temperature protection so the return water stays low enough for the unit to condense.

Why does my combi lose hot water pressure in winter?

Two common causes in Peel Region: scale on the flat-plate heat exchanger from hard water, and a combi sized below the home's simultaneous demand so heating and hot water compete. A descaling flush fixes the first. The second needs correct GPM sizing on replacement.

Do you handle the rebate filing?

Yes. As an ENERGY STAR certified installer we file the Enbridge Home Efficiency Rebate Plus and submit the Canada Greener Homes Grant on your behalf, and we confirm Greener Homes Loan eligibility during the assessment.

Do you cover Erin Mills, Meadowvale and Cooksville?

Yes. The full L5A to L5W postal code range is covered on the same day schedule, including Erin Mills, Meadowvale, Cooksville, Clarkson, and Lorne Park.

How often should a Mississauga boiler be serviced?

Once a year, before the heating season. The 12-point tune-up is $199 to $349 CAD and includes digital combustion analysis, expansion tank pre-charge, water pH and glycol testing, and a pressure relief valve test. Annual service is also what keeps most manufacturer warranties valid.

Still have a question about your boiler?

Talk to a TSSA-licensed technician. Same-day GTA dispatch, 4-hour cold-snap response.

Boiler Service Coverage in Mississauga

Get Directions
Same-Day Emergency Dispatch, 24/7 Cold Snap Response

Book Boiler Installation in Mississauga

Same-day dispatch with a four hour cold-snap response, and an itemised CAD quote before any work starts.

  • Written workmanship warranty
  • Published CAD pricing, no quote gating
  • TSSA G1/G2 licensed technicians